Collection: Washer & Dryer Parts

This is a genuine replacement hinge assembly for washing machines. The door hinges allow the washing machine door to open and close smoothly. Over time, hinges can become worn and less effective, causing the door to feel stiff, loose, or difficult to close correctly. Replacing a worn or damaged hinge assembly restores the correct door action and ensures the door seals properly during wash cycles. This is a straightforward repair that can be completed without specialist tools. This part carries manufacturer part number 12338100000185. It is compatible with select Caple, Euromaid, Kenwood, Logik, Midea, and Montpellier washing machine models. Please check the model fit list before ordering to confirm compatibility with your specific model.

This is a genuine replacement inner drum for select washing machines. If your washing machine drum is stuck and not turning, a faulty drum may be the cause. Replacing the drum can restore normal operation and get your machine working as it should. This replacement drum is suitable for select Bush models and other compatible brands. It is built to the original specification for reliable, long-term performance. This part carries manufacturer part number 20785819 (also referenced as C20785819 and VSTC20785819). Please check the model fit list before ordering to confirm compatibility with your specific washing machine model.

This is a genuine replacement washing machine door seal gasket for Bosch washing machines. The door seal forms a watertight seal between the door and drum to prevent leaks during the wash cycle. A cracked, torn, or mouldy door seal can allow water to escape and should be replaced promptly. This replacement seal is built with flexible rubber for reliable operation through frequent use and a range of wash temperatures. It restores a proper watertight seal and prevents water damage to flooring. This part carries manufacturer part number 20007273 (also referenced as 20006036). Please check the model fit list before ordering to confirm compatibility with your specific washing machine model.

This is a genuine replacement washing machine drum. The drum is the rotating inner cylinder that holds your laundry during the wash and spin cycles. A damaged or cracked drum can affect washing performance, cause unusual noise during operation, and may damage clothing. If your washing machine drum is damaged, cracked, or no longer rotating smoothly, it should be replaced to restore the machine to full working order. This genuine replacement drum restores normal wash and spin performance. This part carries manufacturer part number 20800037 (also referenced as 2080037, C2080037, VSTC2080037, C20800037, and VSTC20800037). Please check the model fit list before ordering to confirm compatibility with your specific washing machine model.

This is a genuine replacement washing machine motor. The motor powers the drum, driving the rotation that agitates and spins your laundry during each wash cycle. Without a functioning motor, the drum will not move and the machine will not complete a wash. If your washing machine drum is not moving or rotating despite the machine showing full power, the motor is likely the cause. A faulty motor prevents the drum from spinning, meaning clothes will not be washed or spun dry. Replacing the motor restores full drum operation and returns the machine to normal working order. This part carries manufacturer part number 11002011000048 (also referenced as 302430660001 and 11002011000196). Please check the model fit list before ordering to confirm compatibility with your specific washing machine model.

This is a genuine replacement door seal for Hoover washing machines. The door seal, also known as a door gasket, forms a watertight barrier between the drum and the door opening, preventing water from leaking out during wash cycles. It is constructed to withstand repeated use and resist wear over time. A damaged or perished door seal is one of the most common causes of washing machine leaks. If you notice water pooling on the floor around the door, or visible cracks, tears, or mould on the existing seal, it should be replaced promptly to prevent water damage to the appliance and surrounding area. This part carries manufacturer part number 70034348. Please check the model fit list before ordering to confirm compatibility with your specific Hoover washing machine model.

This is a genuine replacement door hinge assembly for washing machines. The door hinge assembly secures the door to the appliance body, enabling smooth and reliable opening and closing during everyday use. It keeps the door correctly aligned and safely attached throughout each wash cycle. A loose, stiff, or broken door hinge is a common fault that prevents the door from closing properly, which can cause the machine to fail to start or to leak. Replacing a worn or damaged hinge assembly restores correct door operation and ensures the machine runs safely. This part is manufactured from sturdy metal for long-term durability under repeated use. It carries part number 12338100001462. Please check the model fit list before ordering to confirm compatibility with your specific washing machine model.

This is a genuine replacement selection button set for washing machines. The selection buttons form part of the control panel, allowing you to select wash cycles and settings. They are a direct replacement for worn, broken, or heavily scratched original buttons. Damaged or broken selection buttons prevent you from choosing the correct wash cycle or settings. Even buttons that are not fully broken may become difficult to operate if worn or scratched. Replacing them restores full control of the machine and improves the appearance of the control panel. This part carries manufacturer part number 42236656. Please check the model fit list before ordering to confirm compatibility with your specific washing machine model.

This is a genuine replacement inner door trim for Bosch, Neff, Siemens, Balay, Constructa, and Lynx washing machines. The inner door trim forms the inner seal frame of the washing machine door, holding the door gasket in place and maintaining a watertight seal during wash cycles. A cracked or broken inner door trim is a common cause of washing machine leaks. If you notice water pooling beneath or around the door during a cycle, a damaged door trim is likely the cause. Replacing it promptly prevents further water damage and restores the machine to full working order. This part carries manufacturer part number 00432073 (also referenced as 432073 and 500169). It is a genuine spare part compatible with a wide range of models across the Bosch, Neff, Siemens, Balay, Constructa, and Lynx brands. Please verify compatibility with your model number before ordering.

Ensure a steady water supply to your washing machine with this replacement inlet hose. Designed for secure and leak-free connections, it efficiently channels water from your plumbing system to the appliance. Built for durability, it provides reliable performance during each wash cycle. Please check the model fit list to ensure this part is correct for your model.

The washing machine door seal creates a watertight barrier between the drum and the door, preventing leaks during wash cycles. If your seal is damaged, replacing it helps maintain efficient performance and avoids water damage. Designed for a secure fit, this replacement restores your machine’s reliability. Please check the model fit list to ensure this part is correct for your model. Anti-Grease:To prevent seal from going mouldy as it's made from a grease resistant material EAN 0744478413619

If you notice leakages from the base of your machine, or that water isn't entering your washing machine properly, there is likely to be a problem with a fill hose. The fill hose is the hose that connects your washing machine to the water supply, and like any hose can be subject to damage by being split or generally worn over time. This replacement fill hose could solve this issue, and get your washing machine back to full working order again. Please check the model fit list to ensure that this part is correct for your model.

This is a genuine replacement Bosch Neff Siemens Dispenser tray-lower part spare part Manufacturers Part Number 11011877 Alternative Part Numbers 702579 00702579 EAN 8713411105913

If your washing machine is not dispensing the detergent or softener correctly, then it could be faulty and in need of replacing. If you have a faulty dispenser, it could lead to your clothes not being washed to the level that you have come to expect from your washing machine. With the help of this replacement dispenser, you could soon resolve the issue, to ensure that the detergent is dispensed correctly once again, and get you back the usual cleaning performance from your washing machine. Please check the model fit list to ensure that this part is correct for your model. Manufacturers Part Number 00702581 Alternative Part Numbers 702581 EAN 0744478414128

The drain hose is used for removing the used water from your washing machine! It is possible that over time the drain hose can become damaged and develop a tear or blockage, which can ultimately cause the washing machine to leak or function incorrectly. This genuine replacement drain hose is fitted to the stand pipe or the u-bend under the sink and you may want to check the drain hose if you are experiencing any of the following faults with your washing machine: - Water siphoning into the washing machine- Unpleasant odours forming in the washing machine- Dirty water running into the machine overnight- The drain hose is leaking- The drain hose is blocked or torn Please check model fit list to ensure this part is correct for your model. Manufacturers Part Number 00652608 Alternative Part Numbers 652608 EAN 0744478409568

The Hoses inside your washing machine carry water to and from vital components and can crack or leak, especially if the clamps that hold the hoses in place become worn out. A damaged washing machine Hose can cause serious damage to your home. Most hose failures happen on the inlet connection line, which supplies the hot and cold water. If these lines break, water will flow across the floor until the water-control valve is turned off. Washing machine hoses should be replaced periodically. Corroded water and old age can cause even the strongest hoses to burst over time, making this replacement essential. Please check model fit list to ensure this part is correct for your model.