Collection: Refrigeration

Elitech UEK-3010 is a temperature controller with touch screen buttons (White Fascia) It is suitable for temperature control of refrigeration or heating equipment. Due to its touch buttons, Elitech equipped the EK series with a key lock function to avoid accidental touches that may cause the parameters to change. The touch button adopts high-precision digital capacitance measurement technology, which can avoid various interferences such as water droplets; compared with mechanical buttons, there is no mechanical action, long life, and stable performance. One-way sensor input: temperature probe sensor. One-way control output: refrigeration/heating equipment.

Elitech EK-3030 Black Fascia Digital Temperature Controller Cooing Defrosting and Fan Control Outputs With Temperature and Defrosting Sensor Probe, Touch Key Input. Elitech EK-3030 temperature controller is suitable for temperature control of the middle and low-temperature cold storage. lt could measure, display and control temperature, with the function of temperature calibration, forced defrost, over-temperature alarm and sensor failure alarm, one key recovery of the factory default value, parameters preset, and one key recovery. It adopts a touch key design with the key lock function. Dual-way sensor input: cabinet temperature sensor(Pb1) and defrost sensor(Pb2). Three-way control output: Refrigeration, defrost, and fan. Elitech EK-3030 digital on-off temperature controller features waterproof and dustproof cases with precise touch control screen are suitable for aquarium, greenhouse, incubation, etc. Feature Dual-way sensor input: cabinet temperature sensor and defrost sensor. Multiple defrost control modes, more stable and energy-saving, avoid cold storage swell. Three-way control output: Refrigeration, defrost, and fan. Suitable for temperature control of the middle and low-temperature cold storage or heating equipment. Six touches key design, quick parameter setting, easy operation. It could measure, display, and control temperature, with the function of temperature calibration, and temperature over-temperature alarm, and sensor failure alarm. one key recovery of the factory default value, support parameters preset It adopts a touch key design with the key lock function Specification Measuring range -40℃～99℃ Controlling range -40℃～85℃ Accuracy -30℃～50℃, ±1℃ ± 0.5; others, ±2℃ ± 0.5 Resolution 0.1℃ / 1℃ Mounting size 71mm*29mm Power supply 220±10%(VAC), 50/60Hz Power consumption 5W Work ambient temperature -5℃～55℃ Work ambient humidity 10%～90% non condensing Storage temperature -25℃～85℃ Sensor type NTC (10KΩ/25℃, B value 3435K) Sensor length T

Elitech ECS-180neo Temperature Controller Refrigeration, Defrosting and Fan Control Output

Elitech EK-3030 White Fascia Digital Temperature Controller Cooing Defrosting and Fan Control Outputs With Temperature and Defrosting Sensor Probe, Touch Key Input. Elitech EK-3030 temperature controller is suitable for temperature control of the middle and low-temperature cold storage. lt could measure, display and control temperature, with the function of temperature calibration, forced defrost, over-temperature alarm and sensor failure alarm, one key recovery of the factory default value, parameters preset, and one key recovery. It adopts a touch key design with the key lock function. Dual-way sensor input: cabinet temperature sensor(Pb1) and defrost sensor(Pb2). Three-way control output: Refrigeration, defrost, and fan. Elitech EK-3030 digital on-off temperature controller features waterproof and dustproof cases with precise touch control screen are suitable for aquarium, greenhouse, incubation, etc. Feature Dual-way sensor input: cabinet temperature sensor and defrost sensor. Multiple defrost control modes, more stable and energy-saving, avoid cold storage swell. Three-way control output: Refrigeration, defrost, and fan. Suitable for temperature control of the middle and low-temperature cold storage or heating equipment. Six touches key design, quick parameter setting, easy operation. It could measure, display, and control temperature, with the function of temperature calibration, and temperature over-temperature alarm, and sensor failure alarm. one key recovery of the factory default value, support parameters preset It adopts a touch key design with the key lock function Specification Measuring range -40℃～99℃ Controlling range -40℃～85℃ Accuracy -30℃～50℃, ±1℃ ± 0.5; others, ±2℃ ± 0.5 Resolution 0.1℃ / 1℃ Mounting size 71mm*29mm Power supply 220±10%(VAC), 50/60Hz Power consumption 5W Work ambient temperature -5℃～55℃ Work ambient humidity 10%～90% non condensing Storage temperature -25℃～85℃ Sensor type NTC (10KΩ/25℃, B value 3435K) Sensor length T

This Elitech STC-1000 digital temperature controller thermostat is one of the most classic thermostats from the Elitech with automatic changeover between cooling and heating. It controls the temperature according to the temperature set value and the return difference.

This Elitech E-1000 Temperature Controller Thermostat, Automatic Switch Cooling and Heating, with Lighting Output, Touch Key, With NTC Temperature Probe Sensor is suitable for temperature control of refrigeration, heating and light output. It is an upgraded version of STC-1000 and STC-1000X, Which are the most classic thermostats of Elitech with automatic switch cooling and heating function. With temperature measurement, temperature display, temperature control, temperature calibration, sensor fault alarm and shutdown defrost functions. One-touch restoration of original setting values for easy re-adjustment of parameters.

This Elitech ECS-16 One-Way Output Digital Temperature Controller, Cooling or Heating Mode, Direct Drive Single-phase 1.5HP Compressor is a small, high-precision, easy-to-operate temperature controller thermostat, suitable for temperature control of refrigeration/ heating. The refrigeration relay is a 30A/240V output, which can directly drive a 1.5HP compressor in a single phase. With temperature measurement, temperature display, temperature control, temperature correction, forced defrosting, and sensor fault alarm function. One-touch restoration of original setting values for easy re-adjustment of parameters. The parameter setting of ECS-16 is divided into the user menu and administrator menu. If you are an equipment company, you can set up the administrator menu parameters. The end-user only sets the user parameter menu, which is convenient for users to operate. The administrator menu has a password protection function to prevent users from misusing settings. The main purpose of ECS-16 is to control the temperature of beverage cabinets. Therefore, we set its wiring port as a quick-connect port to facilitate the production and after-sales of professional equipment manufacturers. It is also suitable for freezers, refrigeration, seafood machines, and water heaters. One-way sensor input: temperature probe sensor. One-way control output: refrigeration/ heating equipment. Model: ECS-16 Operating Voltage: 220VAC±10%; 50/60Hz Overall Power Consumption: <3W Temperature Measurement Range: -50℃～90℃ Temperature Control Range: -50℃～85℃ Temperature Measurement Accuracy: ±1℃(-40℃～50℃), Others ±2℃ Display Resolution: 1℃ Product Size: 78.5×34.5×78.5（mm） Mounting Dimension: 71×29 (mm) Rated Current of Output Relay (Refrigeration/ Heating): 30A/240VAC

This Elitech EK-3020 Two-way Output Digital Temperature Controller comes with defrosting Output, with Temperature Probe Sensor, Touch-key Temperature Controller for Cold storage and Freezer More Stable & Reliable* Pass EMC test, industrial level four test, Front panel protection level reaches IP65 Touch Keys, Good User Experience* High precision capacitive touch keys for greater reliability Waterproof & Dustproof* One-piece front panel design for greater protection against moisture and dust Clearer Display, Easy to Use* High brightness digital tube display for the larger display area Easy to Use, No Menu* Single-click to complete the general settings directly, no need to enter the menu Buzzer Alarm Output, More Reliable* Sensor fault alarm and over-temperature alarm Use At Ease, Power-off Memory* With defrost cycle power-off memory function, even if the equipment is unexpectedly power-off, the defrost can still be started in time to ensure the normal operation and cooling efficiency of the unit Multiple Defrost Modes, More Stable and Energy Saving* Two defrost modes of defrost control output: electric heating defrost and hot gas defrost. In addition, with shutdown defrost function Model EK-3020 Operating Voltage 220VAC±10%; 50/60Hz Overall Power Consumption <5W Temperature Measurement Range -40℃～85℃ Temperature Control Range -40℃～99℃ Temperature Measurement Accuracy ±1℃(-30℃～50℃), Others ±2℃; Display Resolution 1℃/0.1℃ Product Size 85.0×35.0×63.8 (mm) Mounting Dimension 71×29 (mm) Rated Current of Output Relay 10A/220VAC