Zanussi ZDH87A2PW Heat Pump Tumble Dryer Not Turning and NO LEDs

July 09, 2024

I have a Zanussi ZDH87A2PW heat pump tumble dryer that’s not turning on (no sounds or LEDs) I’ve checked fuse etc but wondered if there were any common faults ?

I will try and help with this problem about Zanussi ZDH87A2PW Heat Pump Tumble Dryer,

Hi, sorry to hear about the issue with your Zanussi heat pump tumble dryer. First, check the fuse in the plug as you mentioned. Then, follow the lead to the back of the machine. Inside the lid at the top, you'll find an electronic filter or suppressor. Ensure voltage is reaching this unit. There are two wires coming out of it that go to the circuit board.

If power reaches the end of those wires but nothing is displayed on the circuit board, there might be an issue with the board itself. I have included the workshop manual below to help you. You may need to remove and inspect the circuit board for any damage or blown tracks.

Sometimes, a simple issue causes the problem. That's why I've added the full workshop manual and wiring diagram so you can trace the wiring thoroughly. I hope this helps you.

I'll include a link to our European suppliers below. If you enter your model number, it will show a full list of parts with pictures. This should help you identify the component you need for your Zanussi ZDH87A2PW heat pump tumble Dryer. So, please check the link and scroll through the parts until you find what you need.

Zanussi ZDH87A2PW Heat Pump Tumble Dryer Spare Parts

If you want to support the site please mark us to your favourites, also I would be grateful if you would subscribe to our social media channels as this really helps my site and keeps us going.

YouTube. http://www.youtube.com/user/howtorepair
Facebook. https://www.facebook.com/how.to.repair.appliances
And if we really helped you save money you can always click on the Buy Paul a Beer page