Logik LHP8W22 Heat Pump Tumble Dryer Cycle Stops After a Few Minutes
Customer Question
Craig asks:
Logik LHP8W22 Heat Pump tumble dryer runs for about ten minutes, it gets warm, and then it stops. The machine then beeps and the 'dry level' 1 and 2 lights flash.
Model: LHP8W22
Paul Says:
I will try and help with this problem about Logik LHP8W22 Heat Pump Tumble Dryer,
There are 90 similar models to your Logik LHP8W22 Heat Pump Tumble Dryer please use your full model number which is written on your ID plate.
Hi Craig,
I'm sorry to say that I can't get any technical information on the heat pump tumble dryers made for Logic, one of the superstore brands. This is an example of manufacturers not providing technical details to help customers, which makes it hard for me to assist you properly.
You mentioned that the machine warms up after 10 minutes but then stops. This doesn't tell me if the compressor is working correctly. You'll need to run some tests. I've added a video below to show you how to test heat pump tumble dryers. It might help you check if the compressor is working by measuring the wattage with a multimeter, as shown in the video.
I hope this helps. If you need any spare parts for this machine, I've put a link at the top of the page. Please note there are over 90 different variations of this model. Good luck with your repair!
If you want to support the site please mark us to your favourites, also I would be grateful if you would subscribe to our social media channels as this really helps my site and keeps us going.
YouTube. http://www.youtube.com/user/howtorepair
Facebook. https://www.facebook.com/how.to.repair.appliances
And if we really helped you save money you can always click on the Buy Paul a Beer page
Parts for This Model
Showing compatible parts for model LHP8W22