Logik LHP8W18 Heat Pump Tumble Dryer Sometimes Doesn’t Spin
Customer Question
Kai asks:
Logik LHP8W18 heat pump tumble dryer doesn’t spin when we turn it on sometimes. When it happens, if we manually roll the drums ourselves for a bit, it would resume to normal. We’ve been doing this in the last few months. Recently, it gets worse and needs many more manual rolls before it can start normally.
Model: LHP8W18 8 kg Heat Pump Tumble Dryer
Paul Says:
I will try and help with this problem about Logik LHP8W18 Heat Pump Tumble Dryer,
Hi Kai, sorry to hear about the problem with your Logic heat pump tumble dryer LHP8W18. You didn't give us the full model number. These dryers have many variations, so I can't be 100% sure about the components.
Recently, these dryers have had motor changes. If you have an early model, it has a motor and a capacitor that starts the motor. If the drum isn't starting and you need to push it, it means the capacitor needs replacing. You can find the capacitor size on its side; it will say how many microfarads (UF) it is. Just replace it with one of the same size.
However, some newer models have a motor with a built-in capacitor that you can't change. You have to replace the whole motor. It's frustrating what manufacturers are doing nowadays, making machines with limited lifespans. They seem more interested in selling products than making them last.
If you have one of these new motors, you'll need to buy a new one. I can't tell you the exact price, but if you look at the top of the page, there's a link. Find your full model number on the identification plate and match it up to the correct one on this page. The motor will likely cost over £100.
If you decide to repair the machine, clean it thoroughly inside. Remove any fluff and lint, especially from the condenser and evaporator area. This will improve efficiency. Also clean all ducting air flows; cleaner ducts mean faster drying times and lower energy bills.
I hope this helps you. Sorry for ranting about manufacturers, but it's frustrating how they make machines with short lifespans. Good luck with your repair! If you need more help, feel free to contact us.
There are more than 100 similar models with your Logik LHP8W18 Heat Pump Tumble Dryer please use your full model number which is written on your identification plate.
If you want to support the site please mark us to your favourites, also I would be grateful if you would subscribe to our social media channels as this really helps my site and keeps us going.
YouTube. http://www.youtube.com/user/howtorepair
Facebook. https://www.facebook.com/how.to.repair.appliances
And if we really helped you save money you can always click on the Buy Paul a Beer page

Logik LHP8W18 Heat Pump Tumble Dryer Spares
Match your part for Logik LHP8W18 Heat Pump Tumble Dryer and the use reference number in list below and click on the link to your part
Parts for This Model
Showing compatible parts for model LHP8W18 8 kg Heat Pump Tumble Dryer