Hotpoint Washing Machine WT960P Fault code 08 and won’t spin
Machine will wash and rinse but when it comes to spin it beeps and gives fault code 08
I will try and help with your HOTPOINT Washing Machine WT960P problem
To empty the washer, remove the drain hose from the outlet, and lay it down to floor level, this will let the water run out into a bucket or similar.
Code F08 is indicating means the heater relay cannot be activated.
Check all connections to and from the pressure switch, the module, and the heater.
The heater relay can't be activated
Hotpoint washing machine flashing 8 times or displaying error code F08 usually indicates “Heater relay can't be activated” or “heater relay stuck”. The heater relay on these machines is on the pcb, the main control board at the back of the machine. with regards to not spinning this may be a fault with the board.
All the parts for your washing machine in the exploded diagram below, just match it up to the part number in the list below that, And I've included a selection of videos for your washing machine
Common questions people ask about on your model of the washing machine.
washing machine Won´t Drain, Will not drain, doesn´t drain, does not empty – these are all pump problems, see video on this.
washing machine Will not start, won’t start, Will not open – this is usually due to the machine still having water in it or a door interlock fault, see video on this.
washing machine Will not spin, Wont spin, will not spin, doesn´t spin, fills up but the drum is not turning, won't agitate or spin, the drum doesn't move! - these faults can either be motor related or pump related and, on some models, will be the control module pcb
washing machine Does not take conditioner, is not taking in any water.- these are all water valve related, see videos on this.
washing machine Is leaking from the door, leaking from bottom front, leaking from front door - these are all door seal/gasket related, see videos on this. Can also be hoses or pump.
washing machine is making a lot of noise, this can be imbalanced load bad suspension units or problem with drum bearings or spider
To try and help with further problems on your washing machine, I have put together a full list of videos below on your washing machine and exploded diagram of your machine with all parts listed below or search our REPAIR GUIDES or FAQ’
If you want to support the site please mark us to your favourites, also I would be grateful if you would subscribe to our social media channels as this really helps my site and keeps us going.
YouTube. http://www.youtube.com/user/howtorepair
Facebook. https://www.facebook.com/how.to.repair.appliances
And if we really helped you save money you can always click on the Buy Paul a Beer page
Parts for This Model
Showing compatible parts for model WT 960