Hotpoint Washing Machine Aquarius WF321P All lights flashing
I have just seen this video after fixing my wf321p earlier with this exact fault. I have to ask though about how you have fitted the electrolytic capacitor on this board. I can see the polarity before you remove the faulty capacitor and the markings on the board are a white circle and a + which both show the opposite that you refer to as “positive on the left” as the +ve is clearly marked on the board to the right. The white band marked -ve on the capacitor can be seen before removal and is nearest the small 8 pin I.C. adjacent to the capacitor being replaced which is the white circle on the board. I have a photo of mine before removal which also shows this. Basically, it looks and sounds to me as though you are fitting this capacitor the wrong way round. The link below also shows the capacitor with the -ve side nearest the ‘chip’ and “on the left where the little white dot is”. Electrolytic capacitors fitted the wrong way round don’t usually last very long and can ‘go’ in style as it were.
I will try and help with your Hotpoint Washing Machine WF321P problem
As you did not send the link to the video I can't check it but I would imagine I did do it correctly, some circuit boards the positive and negative might be the other way around but it will clearly show you on the circuit board which is the positive and which is the negative the PCBs are marked with - and +
All the parts for your washing machine in the exploded diagram below, just match it up to the part number in the list below that, And I've included a selection of videos for your washing machine
Common questions people ask about on your model of the washing machine.
washing machine Won´t Drain, Will not drain, doesn´t drain, does not empty – these are all pump problems, see video on this.
washing machine Will not start, won’t start, Will not open – this is usually due to the machine still having water in it or a door interlock fault, see video on this.
washing machine Will not spin, Wont spin, will not spin, doesn´t spin, fills up but the drum is not turning, won't agitate or spin, the drum doesn't move! - these faults can either be motor related or pump related and, on some models, will be the control module pcb
washing machine Does not take conditioner, is not taking in any water.- these are all water valve related, see videos on this.
washing machine Is leaking from the door, leaking from bottom front, leaking from front door - these are all door seal/gasket related, see videos on this. Can also be hoses or pump.
washing machine is making a lot of noise, this can be imbalanced load bad suspension units or problem with drum bearings or spider
To try and help with further problems on your washing machine, I have put together a full list of videos below on your washing machine and exploded diagram of your machine with all parts listed below or search our REPAIR GUIDES or FAQ’
If you want to support the site please mark us to your favourites, also I would be grateful if you would subscribe to our social media channels as this really helps my site and keeps us going.
YouTube. http://www.youtube.com/user/howtorepair
Facebook. https://www.facebook.com/how.to.repair.appliances
And if we really helped you save money you can always click on the Buy Paul a Beer page
Parts for This Model
Showing compatible parts for model Aquarius WF321P