Hoover Dynamic DX C10TCE-80 Tumble dryer Next Trips RCD as soon as switched on at socket

I will try and help with this problem Hoover Dynamic DX C10TCE-80 Tumble dryer

 

this may be a problem with the heating system or there's a possibility that you have a direct short on the tumble dryer this can be caused by components like the motor or possibly a direct short on a Wire.

I have put a full list of parts for this tumble dryer below and also an exploded diagram to help you understand how the machine is put together I have also put some useful videos to assist you and you'll repair

 

 

If you want to support the site please mark us to your favourites, also I would be grateful if you would subscribe to our social media channels as this really helps my site and keeps us going.

YouTube. http://www.youtube.com/user/howtorepair
Facebook. https://www.facebook.com/how.to.repair.appliances
And if we really helped you save money you can always click on the Buy Paul a Beer page

 

Hoover Dynamic DX C10TCE-80 Tumble dryer spare parts

Error & Fault codes for Hoover Dynamic DX C10TCE-80 Tumble dryer

E03 Tank is full of water and has to be emptied.

E05 Front NTC sensor is either short circuit or open circuit. Check front NTC sensor and/or

wiring.

E07 Alarm, filter occluded, This error can only appear after the end of a cycle. The filter is

occluded because of fluff presence, the correct ventilation is not allowed. Clean the filter.

E08

Thermo fuse intervention. Replace the thermo fuse and check that ventilation circuit is

clean, check the wiring.

E10 Missing communication between "Cuore" Electric Module and Display Electric Module and/or

Wiring.

E11

In the rear part of condenser the temperature is too high. Check that all ventilation ducts

are clean, check that ventilation system is working well. Check the condenser, the motor,

the fan could be broke/blocked.

E12 Pressure switch doesn’t work. Check the pressure switch and/or wiring. Check that the air

trap is clean.

E13 Compressor NTC Probe is either Short Circuit or Open Circuit. Check the compressor NTC

probe and/or wiring.

E14

Rear NTC Probe is either Short Circuit or Open Circuit. Check the rear NTC probe and/or

wiring.

E15 Main board not programmed. Program the main board.

E19

It is not possible to use NFC tag for any actions until the next POWER ON/OFF. (switch off

and switch on)

E21

Heater control relay on the “cuore” electric module is not working. High temperature has

been reached – Thermo Fuse worked. Check the thermo Fuse, and the wiring. Check that

both the ventilation circuit and ventilation ducts are clean and duct is not obstructed.

Replace the “cuore” electric module only in the case that the heater command relay is

faulty.

E22

Compressor control relay on the “cuore” electric module is not working. Check the

compressor and compressor wiring/connections. Replace the “cuore” electric module only

in the case that the compressor command relay is faulty.

Match your part for Hoover Dynamic DX C10TCE-80 Tumble dryer and the use reference number in list below and click on the link to your part

Reference	Part Number	Description
10	40009129	Timer/select. knob
31b	40011397	Control panel with Sensor
48	40010677	R/H side frame
48a	40010678	L/H side frame
49	40004597	Top rear frame
49g	41041380	Trade mark plate
51	40004601	Work top
60	40009040	Hinge
63	40006231	Door glass
67	40010996	Door with trim
77	40004062	Rear panel
77	40012171	Rear panel
79	40002885	Foot
82	40009192	Door panel
88	40008589	Front panel
131a	92470020	Hose clip
152a	40010529	Light guide support
156	41039164	Capacitor 7 MF
157	40010653	Harness
157	40012503	Harness
161	40005021	Pump
164	91200489	Anti jamming filter radio
171	40008460	Main motor
202	40009120	Drum
202	40011928	Drum
205	40006362	Drum shaft assy
218	03210179	Bearing
229	24721202	Circlip
230	40004306	Bearing clamp
231a	40007401	Pipes holder
271	40005393	Door gasket
280	40009775	Hose clip
292	40001012	Drive belt
292	40012264	Drive belt
318b	49040749	Electronic control PCB - NFC -Programmed
318c	49041739	Electronic NFC pcb - Not programmed
442	40009278	Fan
442a	40009379	Rear fan
443	41037151	Thermostat
444	40012558	Duct fun
445	40012556	Nozzle Cond. Recovery
445a	40012557	Nozzle Cond. Recovery Seal
448	40005010	Heater
448	40013366	Heater
461h	41014595	drying probe seal
491c	91200201	Mains cable x UK
494d	40010528	Light Guide - Digital Display
520	40006928	Door coupler
607	40006220	Pin for hinge
631	40006586	Stopper
643a	41041381	Handle plate - profile
647	40008382	Water condenser
654	40003802	Thermostat gasket
671	03610428	Washer
690	40006246	Rear sealing felt
690a	40004577	Rear cover seal
690c	40010756	Seal motor/water duct
696	40006820	Heater support
697	40003226	Heater support disk
706	40010765	Front ring assembly
706	40012494	Front ring assembly
707	40005584	Filter for carter
727	40004816	Gasket
728	40006251	Gasket
731b	40012561	Flow pipe (Water drain)
731c	40009075	Water Delivery Pipe
734	40012701	Container
734	40012545	Container
738	40004817	Gasket
745	40009144	Kickplate assy
748	03320032	Tube
755	40007362	Cover
755a	40007363	Fan insert
756	23715194	Spring
757	40003315	Gasket
763b	40003319	Water rear duct gasket
763d	40008360	Reservoir top cover
764	40004815	Gasket
766	40009648	Water container assy
766b	40004928	Water container front cover
777	40004157	Heater gasket
797	40004610	Beltightening pulley
799	40001026	Belt tighteningb spring
804	40009167	Hinge fixing upper bracke
819	40009121	Drum scowel
822	40010003	Innerdoor assy
826	40004091	Door hook
835	40004307	Drum support wheels
840	40010626	Float assy
840a	40008358	Floating
840b	41041353	Microswitch
998a	40011399	Eeprom File NFC
999	41045051	Electrical diagram
1004	40005153	Flow restrictor
1017	41022106	NTC probe
1026	40007831	Front felt

full list of spare parts for this model below Hoover Dynamic DX C10TCE-80 Tumble dryer