Beko RecycledTub WTK104121A Washing Machine Water Drips From the Bottom
Hi Paul, I have this Beko RecycledTub WTK104121A 10 kg 1400 spin washing machine. There are water leaks from the bottom of the door seal that run down the front of the machine after the door is opened. I think this is a common issue that people face. Could you please help me about the issue? How can I solve it?
I will try and help with this problem about Beko RecycledTub WTK104121A Washing Machine,
Hi Barry, thanks for your question about your Beko washing machine. If water is dripping from the door seal after the cycle ends, it could be because the machine isn't level. Also, check inside the drum where the seal attaches at the bottom. There are small drain holes designed to let water flow back into the drum at the end of the cycle. Make sure these holes aren't blocked.
If the machine isn't level, this can cause issues too. The drum should be completely empty of water at the end of the cycle. Water might be collecting in the dip inside the door seal. I can't see how water would flow over the door seal and out if there's no water in the drum since these drain holes are lower than the lip of the door seal.
Also, check if water is tracking down from the soap drawer. The conditioner compartment might be blocked and full of water, but this would only leak if the machine isn't level.
For further assistance, my contact details are on the contact us page. I've included an exploded diagram of your machine showing that part number 54 is the door seal. Match this with the parts list at the bottom of the page if you need a replacement.
I've also added some videos on how to replace the door seal and other useful tips for Beko machines. The door seal is fully explained on page 27 of the workshop manual listed below. I hope this helps!
Also, ensure the drain holes at the bottom of the door seal are in the 6 o'clock position. If someone has worked on the machine before, they might have fitted the door seal incorrectly. This could also be due to a rare manufacturing fault. Check that these drain holes are correctly positioned at the bottom of the drum.
If you want to support the site please mark us to your favourites, also I would be grateful if you would subscribe to our social media channels as this really helps my site and keeps us going.
YouTube. http://www.youtube.com/user/howtorepair
Facebook. https://www.facebook.com/how.to.repair.appliances
And if we really helped you save money you can always click on the Buy Paul a Beer page

Beko RecycledTub WTK104121A Washing Machine Spare Parts
Match your part for Beko RecycledTub WTK104121A Washing Machine and the use reference number in list below and click on the link to your part
full list of spare parts for Beko RecycledTub WTK104121A Washing Machine model below
| Reference | Part Number | Description |
|---|---|---|
| 1 | 2467701300 | TOP FRAME ASSEMBLY |
| 1 | 2425301300 | TOP FRAME ASSEMBLY |
| 10 | 2496601300 | FRONT DOOR ASSEMBLY BX XL |
| 100 | 2000811400 | AIR PIPE HOSE L=610 mm |
| 1008 | 2829960200 | PULLEY FIXING SCREW |
| 1014 | 2852930200 | ENCODER PROTECTOIN PART |
| 103 | 2814430200 | HOSE CLAMP |
| 103 | 2814430100 End Of Life | HOSE CLAMP |
| 106 | 2906860700 | HOSE -WATER INLET SLIM-COLD |
| 106 | 2426000200 | HOSE -WATER INLET SLIM-COLD |
| 106 | 2906760300 End Of Life | HOSE -WATER INLET -COLD |
| 1096 | 1912260300 | SCREW |
| 1096 | 2836970300 | SCREW (4x11) |
| 11 | 2842650100 End Of Life | DOOR GLASS |
| 11 | 2842650300 | FRONT DOOR GLASS |
| 117 | 2857160100 | TUB INLET HOSE |
| 1210 | 2865200100 | TUB-FILTER HOSE ASSEMBLY COMPLETE |
| 1210 | 2478000100 | TUB FILTER HOSE ASSEMBLY COMPLETE |
| 1251 | 2500001000 | MOTOR BOARD ASSY. |
| 13 | 2849660600 | DOOR LOCK |
| 13 | 2849660500 | DOOR LOCK |
| 1363 | 2500706000 | WELDED TUB ASSY |
| 1384 | 2882601600 End Of Life | HEATER ASSEMBLY without NICKEL |
| 1384 | 2863403000 | HEATER ASSEMBLY without NICHEL |
| 1384 | 2850360100 | HEATER ASSEMBLY |
| 1394 | 2451509164 | LIGHT GUIDE BUTTON ASSMBLY |
| 14 | 2858570200 | PLASTIC HINGE |
| 1406 | 2820820100 | CHASSIS FLAP |
| 1442 | 2817050400 | SHOCK ABSORBER PIN |
| 1459 | 2826440100 | FRONT WALL HOLDER |
| 146 | 2493800200 | DETERGENT DISPENSER ASSY SNAP FIT |
| 146 | 2493800100 | DETERGENT DISPENSER ASSY SNAP FIT |
| 1460 | 2826450100 | FRONT WALL HOLDER PIN |
| 1467 | 9003860400 | SCREW. |
| 1467 | 9003860800 | SCREW. |
| 1470 | 2833820400 | CABINET ASSEMBLY AND BACK COVER |
| 149 | 2831720900 | LOWER COUNTER WEIGHT |
| 149 | 2841180700 | COUNTERWEIGHT-LOWER |
| 1497 | 2707730400 | PLASTIC SCREW 3x4_5 |
| 1520 | 2830690100 | CABLE HOLDER |
| 1528 | 2828820400 | PANEL GASKET |
| 1529 | 2831380100 | CABLE HOLDER |
| 1535 | 2826420100 | HOSE HOLDER |
| 1537 | 2858780100 | FLAME BARRIER |
| 1567 | 2841630200 | HEXAGON NUT FİBER |
| 1575 | 2858560100 | TERMINAK SHEET |
| 1585 | 2709975200 | PUMP COVER TYPE 03+ ARC1165 |
| 1586 | 2709960400 | BX PUMP HOLDER (PUSH-UP) |
| 16 | 2835320200 | HINGE SUPPORT BRACKET |
| 162 | 2834310400 | INTERFERENCE SUPPRESSOR |
| 162 | 2827981200 | INTERFERENCE SUPPRESSOR |
| 1640 | 2828170500 | PRESSURE SWITCH |
| 1640 | 2833830300 | PRESSURE SENSOR METALFLEX |
| 1640 | 2466301501 | PRESSURE SWITCH |
| 1646 | 2860640100 | SHOCK ABSORBER |
| 166 | 2834085300 | MAIN CABLE HARNESS |
| 1686 | 2002374300 | HOSE CLAMP (ø 1.8) |
| 169 | 2836390900 | POWER CORD ASSY. |
| 1701 | 2837560100 | PINNED CABLE CONNECTOR |
| 1741 | 2850350100 | INNER PART |
| 1785 | 9003611200 | SHEET METAL SCREW(B4_2x11.5-TOOTHED) |
| 18 | 2912701400 | ADJUSTABLE FEET ASSEMBLY |
| 1837 | 2443900200 | CUSHION SHEET ASSEMBLY |
| 186 | 2858195031 | MAIN BOARD ASS. |
| 1862 | 2504400500 | PUMPE COVER ASSEMBLY ARC1165 ANTRASIT |
| 1869 | 2853170100 | SECURITY SWITCH OPENING PART |
| 1873 | 2848250100 | TOP FRAME FIXING PART LEFT |
| 1874 | 2847840100 | TOP FRAME FIXING PART RIGHT |
| 1902 | 2907195900 | HOSE |
| 1935 | 2857070100 | LIQUID DETERGENT TOOL |
| 194 | 2840941600 | PUMP-FILTER ASSEMBLY |
| 1951 | 2859590100 | CABLE HOLDER |
| 197 | 2459209870 | DRAWER PANEL |
| 20 | 2737601600 | TRANSPORT SAFETY ASSEMBLY VPE1 |
| 2010 | 2424900200 | DELTA PT SCREW ASSY |
| 203 | 2451905900 | SELECTOR KNOB ASSEMBLY |
| 208 | 2451409495 | PANEL BODY ASSY. |
| 230 | 2603901100 | CABINET BELLOWS CLAMP ASSEMBLY |
| 25 | 2801540200 | REAR COVER CAP |
| 33 | 9001230800 | PLASTIC CLAMP 152 mm |
| 336 | 2857080400 | DETERGENT DRAWER |
| 336 | 2478900300 | DETERGENT DRAWER ASSEMBLY SNAP FIT |
| 336 | 2478900400 | DETERGENT DRAWER ASSEMBLY SNAP FIT |
| 336 | 2857080300 | DETERGENT DRAWER |
| 341 | 2851560200 | PULL OPEN HOOK |
| 373 | 2803801900 | DISCHARGE HOSE ASSEMBLY |
| 401 | 2851421000 | FRONT PANEL |
| 411 | 2811230100 | DISCHARGE HOSE HOLDER |
| 45 | 2859430100 | COUNTERWEIGHT (UPPER).. |
| 45 | 2816990200 | UPPER COUNTER WEIGHT |
| 45 | 2816990700 | UPPER COUNTER WEIGHT |
| 53 | 2820360300 | SUSPENSION SPRING |
| 54 | 2710540100 | DOOR HOOD-RUBBER |
| 55 | 2802580600 | DOOR GASKET SPRING |
| 552 | 2002370600 | HOSE CLAMP (Ø 13.3) |
| 553 | 2000610200 | HOSE. |
| 56 | 2853680300 | PLASTIC PULLEY |
| 59 | 2907260500 | ELASTIC POLY-V BELT |
| 59 | 2852280100 End Of Life | ELASTIC POLY-V BELT |
| 598 | 2505500100 End Of Life | FILTER ASSEMBLY |
| 60 | 2818450500 | ENGINE CONNECTION SCREW |
| 60 | 2818450100 End Of Life | ENGINE CONNECTION SCREW |
| 617 | 2703946400 | Felt with adhesive |
| 617 | 2703942300 | FELT (YOC 45 SIDE PANEL) |
| 63 | 2851990200 End Of Life | MOTOR |
| 63 | 2859790100 | MOTOR |
| 63 | 2843120300 | MOTOR (ATLAS 32 MM) |
| 66 | 2816871100 | SHOCK ABSORBER |
| 677 | 2808740200 | STOPPER. |
| 682 | 2811250100 | M8 x 1_25 FLANGED NUT |
| 684 | 2809470100 | DOOR LATCH. |
| 7 | 2827610600 | BACK COVER |
| 719 | 2853580200 | PLUG HOLDER |
| 719 | 2853580100 | PLUG HOLDER(NATURAL) |
| 737 | 2906850200 | WATER INLET VALVE |
| 737 | 2907930100 | WATER INLET VALVE_HongChang |
| 737 | 2906870200 | WATER INLET VALVE |
| 737 | 2836480100 | WATER INLET VALVE |
| 78 | 2801430300 | SHOCK ABSORBER PIN |
| 78 | 2817050300 End Of Life | SHOCK ABSORBER PIN |
| 78 | 2801430400 | SHOCK ABSORBER PIN |
| 797 | 2831320200 | Cable Holder |
| 797 | 2831370100 | CABLE HOLDER |
| 80 | 2898400200 | SPECIAL BOLT. |
| 820 | 2834830300 | SHEET SCREW (SELF ADJUSTING THREADING) |
| 827 | 2832240400 | TOP SUPPORT BRACKET |
| 8355 | 2002371700 | HOSE CLAMP (Ø 28_7) |
| 8359 | 2002372400 | HOSE CLAMP (Ø 38.8) |
| 8365 | 2828040300 | DRAIN HOSE HOLDER |
| 8396 | 111201010 | BOLT (AM5x11 DIN 7985 4.8 TORX) |
| 8397 | 9003610500 | HEET METAL SCREW(B4_2x9_5-TOOTHED) |
| 8397 | 9003610900 | SHEET METAL SCREW (B4.2x9.5 K=8 TOOTHED |
| 8398 | 9003670300 | SCREW FOR PLASTICS |
| 8412 | 2831790100 | SPECIAL SHEET SREW |
| 8416 | 2832450100 | SPECIAL PT SREW |
| 8419 | 2963340100 End Of Life | WASHERED NUT (M6x1) |
| 8430 | 2826150100 | HOSE CLAMP |
| 8431 | 2826150200 | HOSE CLAMP |
| 8438 | 1912260100 | SCREW |
| 8440 | 1912250400 | PLASTIC SCREW |
| 8440 | 1912250200 | PLASTIC SCREW |
| 9 | 2850945300 | HANDLE BX XL ARC1165 |
| 93 | 2704480100 | HOSE HOLDER |
| 953 | 2903090600 | DOOR LOCK WATER PROTECTOR |
| 964 | 2845310300 | CARD PROTECTOR FOIL |
| 99 | 2857090100 | SIPHON |
Service Documents
Parts for This Model
Showing compatible parts for model RecycledTub WTK104121A