Beko DCU8230 Condenser Tumble Dryer Noisy
Customer Question
Martin Coggin asks:
Hi love all your videos. I have a Beko DCU8230 Condenser Tumble Dryer. I couldnt find one that showed how to change the front felt support system. The dryer works fine, its clean but it is noisy. There is a lot of play at the front of the machine suggesting the felt and associated bearing pads need replacing. Can you help? Many thanks martin
Model: DCU 8230
Paul Says:
I will try and help with this problem about Beko DCU8230 Condenser Tumble Dryer,
Good morning, Martin. Thank you for your question about your Beko condenser tumble dryer.
Firstly, I have added a link at the top of the page and some links at the bottom for any spare parts you might need. I haven't made a video on replacing that component yet. The front felt system stops fluff from getting inside the cabinet, but there are two roller wheels at the front of the machine that support the drum.
You should inspect the back bearing and the front two rollers. You can see these in the exploded diagram below, listed as 1459. These are part of the roller assembly. The genuine part number for these is 2969900200. These parts often wear out and might need replacing.
I found a workshop manual for your machine that shows how to disassemble the cabinet and replace these parts. It also shows how to access and inspect the back bearing, which is usually made of phosphorous bronze and can wear out.
You should also check the pulley wheel on the motor and ensure the belt is in good condition, as this can cause noise too.
I hope this information helps you. It took me some time to gather it all for you. There is also useful information on diagnosing faults, fault finding, and error codes for your machine. It’s worth watching a video on maintaining condenser tumble dryers, as they need maintenance every couple of years to remove fluff inside the machine.
If you want to support the site please mark us to your favourites, also I would be grateful if you would subscribe to our social media channels as this really helps my site and keeps us going.
YouTube. http://www.youtube.com/user/howtorepair
Facebook. https://www.facebook.com/how.to.repair.appliances
And if we really helped you save money you can always click on the Buy Paul a Beer page

Beko DCU8230 Condenser Tumble Dryer Spares
Match your part for Beko DCU8230 Condenser Tumble Dryer and the use reference number in list below and click on the link to your part
Beko DCU8230 Condenser Tumble Dryer Wiring Diagram
Beko DCU8230 Condenser Tumble Dryer Wiring Diagram 2
Beko DCU8230 Condenser Tumble Dryer Service Handbook
Beko DCU8230 Condenser Tumble Dryer Error Flow
Beko DCU8230 Condenser Tumble Dryer Service Program
Beko DCU8230 Condenser Tumble Dryer Demounting
Beko DCU8230 Condenser Tumble Dryer Body
Beko DCU8230 Condenser Tumble Dryer Main Body
Beko DCU8230 Condenser Tumble Dryer Top Panel
full list of spare parts for Beko DCU8230 Condenser Tumble Dryer model below
| Reference | Part Number | Description |
|---|---|---|
| 1 | 2974500100 | TOP PLATE |
| 10 | 2976900100 | FRONT DOOR ASSEMBLY |
| 1003 | 2971650300 | CAPACITOR (ARCOTRONICS 9 uF) |
| 1005 | 2962510800 | CONDENS PUMP |
| 1005 | 2962510600 | CONDENS PUMP |
| 1044 | 133000001 | WASHER 12x18x1 DIN 988.. |
| 1045 | 160200200 | Snap Ring 9x1 DIN 6799 DRCS68 |
| 1046 | 2973900500 | REAR PANEL ASSY |
| 1077 | 492204404 | PULLEY ASSY FOR SERVICE-ARES |
| 1087 | 2982820100 | HOSE AND CABLE HOLDER OPPOSITE DIRECTION |
| 1098 | 2962630100 | FAN COVER - COOLING |
| 12 | 2962120100 | INNER DOOR_(ARES_ARC1_WITHOUT_SWITCH) |
| 1209 | 2969500300 | LOCK BODY ASS |
| 1211 | 2963910100 | LIGHT GUIDE |
| 1244 | 2979290100 | POMP COVER |
| 1246 | 2971703502 | CABLE ASSEMBLY |
| 1248 | 2960910300 | SILICONE GASKET |
| 1249 | 2980703800 | CABLE ASSEMBLY |
| 1256 | 2973100100 | SHAFT-FRONT BEARING ASSY |
| 1259 | 2972300100 | FILTRE CASETTE ASSY |
| 1260 | 2962960100 | OVERFLOW FLOAT |
| 1268 | 2963670100 | LIGHT GUIDE SET |
| 1271 | 2962690100 | AIR GUIDING PART |
| 1279 | 2968300300 | BEARING SENSOR COVER ASSEMBLY |
| 1287 | 2960150100 | RUBBER STOPPER |
| 1290 | 2962590100 | DOOR GASKET |
| 1295 | 2963120400 | MOTOR BRACKET CLAMP (PLASTIC) |
| 1303 | 2962450100 | TANK GUIDE (TOP_60CM) |
| 1306 | 2961390200 | TANK GUIDE BARRIER |
| 1313 | 2705810300 | PT SCREW (3_5x8) |
| 1377 | 2965200300 | MAIN CABLE ASSEMBLY |
| 1390 | 9002900200 | COUNTERSUNK HEAD SCREW (PT-4X14) |
| 1398 | 2951780300 | DELTA PT VIDA 50x26 WN 5454 HB |
| 1399 | 2962950100 | NTC GASKET |
| 14 | 2962170200 | HINGE |
| 1401 | 2963210100 | MOTOR SHAFT SEAL |
| 1417 | 2705810400 | PT SCREW (3_5x14) |
| 1440 | 2961690100 | ADJUSTABLE PLASTIC FOOT |
| 1451 | 2963180200 | BACK COVER FELT |
| 1453 | 2953741500 | SINGLE ADHESINE EPDM FOAM |
| 1454 | 2963090100 | AIR GUIDING GASKET |
| 1455 | 2962810100 | SIDE WALL PIN |
| 1457 | 2971900200 | NTC (EPCOS_12K) |
| 1457 | 2971900300 | NTC (THINKING_12K) |
| 1457 | 2971900500 | NTC (GAOLI_12K) |
| 1457 | 2971900100 | NTC |
| 1459 | 2969900200 End Of Life | ROLLER ASSY |
| 1460 | 2951261000 | POMP WATER TANK HOSE. |
| 1462 | 2951260800 | POMP WATER TANK HOSE. |
| 1463 | 2951260900 | POMP WATER TANK HOSE. |
| 1465 | 2951261100 | POMP WATER TANK HOSE. |
| 1466 | 9003272000 | PLASTIC SCREW (DIAMETER 4x10) INOX |
| 1469 | 100700120 | SCREW (B4.2*9.5 DIN 7982-H) |
| 1471 | 2953741100 | SINGLE ADHESINE EPDM FOAM. |
| 1473 | 2962390100 | LOCK MOUTH |
| 1474 | 2960720100 | TIME DELAY PCB |
| 1475 | 2960304600 | CABLE ASSEMBLY |
| 1478 | 2963420100 | WATER COLLECTOR |
| 1481 | 2961720100 | COOLING AIR INFLOW RECTIFIER |
| 1482 | 2963240100 | COOLING AIR INFLOW FELT |
| 1483 | 2963250100 | COOLING AIR OUTFLOW FELT |
| 1484 | 2961990100 | SIDE SUPPORT (RIGHT 60CM) |
| 1485 | 2962010100 | Side support left 60CM |
| 1486 | 2974470700 | SHAFT DRUM COVER SHC ALS |
| 1486 | 2974470100 | SHAFT DRUM COVER |
| 1486 | 2974470300 | SHAFT DRUM COVER |
| 1489 | 2962290100 | DOWN HINGE GUIDE |
| 1490 | 2962310100 | UP HINGE GUIDE |
| 1492 | 2962460100 | TANK GUIDE CAP |
| 1493 | 2826510200 | PEG PLASTIC CLAMP |
| 1495 | 9003271700 | PLASTIC SCREW |
| 1587 | 2966990100 | CABLE TRAY |
| 166 | 2994901100 | MAIN CABLE ASSEMBLY |
| 169 | 2970444900 | POWER SUPPLY CORD |
| 169 | 2970445400 | POWER SUPPLY CORD |
| 169 | 2970447100 | POWER SUPPLY CORD |
| 18 | 2973500100 | ADJUSTABLE PLASTIC FOOT ASSY. |
| 180 | 2964170100 | ON_OFF SWITCH(ROLD (+) FORM) |
| 186 | 2970012302 | ELECTRONIC PCB ASSY. (CNDU SENS_3K) |
| 189 | 491500303 | POLY-V 285 H 4 MA BELT |
| 197 | 2963749003 | DRAWER PANEL ASS. |
| 200 | 2976109002 | PANEL BODY |
| 2013 | 2970540100 | POWER PLUG HOLDER |
| 203 | 2976702000 | PROGRAMME KNOB BUTTOM_ASSY |
| 2071 | 2972960100 | DUAL SOCKET COVER |
| 2072 | 2972950100 | DUAL SOCKET CASING COVER |
| 208 | 2963989002 | PANEL BODY |
| 300 | 2963680100 | FUUNCTION BUTTON |
| 33 | 9001230800 | PLASTIC CLAMP 152 mm |
| 339 | 2963640100 | OUTER DOOR |
| 341 | 2962150100 | LOCK HOOK |
| 374 | 265900012 End Of Life | OVEN LAMP 15 W-230 V |
| 401 | 2963580100 | FRONT PANEL |
| 4210 | 2974870100 | INTERFERENCE FILTER |
| 43 | 2960310329 | USER'S MANUAL. |
| 468 | 2963710100 | ON OFF BUTTON (TIP02+ARC 734 MAVI) |
| 48 | 2971400400 | DRUM ASSEMBLY |
| 481 | 2827190400 | Rotary switch |
| 581 | 2966980100 | HEATER CABLE GUARD |
| 583 | 2705870100 | SELF LOCKING CABLE HOLDER |
| 584 | 2962860100 | DRUM LIFTER |
| 59 | 2962470200 | ELASTIC POLY-V BELT. 7PH 1956 |
| 63 | 2963141600 | DRYER MOTOR |
| 632 | 2962160100 | HINGE BUSHING |
| 65 | 2970101500 | HEATER ASSY |
| 685 | 2963690100 | TIME ADJUSTMENT BUTTON |
| 750 | 2961850100 | PCB HOLDER |
| 804 | 2973801100 | REAR DRUM TIGHTNESS PLATE ASSY |
| 804 | 2973800700 | REAR DRUM TIGHTNESS PLATE ASSY |
| 804 | 2973800100 | REAR DRUM TIGHTNESS PLATE ASSY |
| 822 | 2963540100 | KICK PLATE - LEFT |
| 826 | 2972900800 | HEATER COVER ASSY |
| 826 | 2972900500 | HEATER COVER ASSY |
| 827 | 2962020100 End Of Life | UPPER BEAM |
| 8303 | 9003270200 | PLASTIC SCREW |
| 8318 | 2002370900 | HOSE CLAMP (Ø 16.4) |
| 8320 | 100601520 | SHEET METAL SCREW (B4.2X13 DIN 7981-H) |
| 834 | 2959400200 | REAR BEARING ASSEMBLY |
| 8384 | 9003270100 | PLASTIC SCREW |
| 8385 | 9003270400 | PLASTIC SCREW (4_10) |
| 8386 | 9003270500 | PLASTIC SCREW (4_12) |
| 8392 | 9003610300 | sheet metal screw(B4_2x9_5-perforated) |
| 8397 | 9003610100 | SHEET METAL SCREW(B4_2x9_5-perforated) |
| 8398 | 9003670100 | SCREW FOR PLASTIC -4.5x12 |
| 8403 | 9003860300 | SHEET METAL SCREW |
| 8413 | 120800120 | FIBERED_NUT_M6X1_DIN_985 |
| 8419 | 2963340100 End Of Life | WASHERED NUT (M6x1) |
| 842 | 2960190100 | CABLE HOLDER |
| 8422 | 2951580400 | COUNTERSUNK HEAD PT SCREW (4.5x12) |
| 8428 | 2971870100 | MX10 RYSB PERFORATED SCREW |
| 843 | 2962440100 | WATER TANK (UP_8KG) |
| 8430 | 9003860900 | SHEET METAL SCREW |
| 8434 | 2951780400 | DELTA PT SCREW |
| 844 | 2961290200 | DISCHARGING FUNNEL |
| 845 | 2963530100 | KICK PLATE - RIGHT |
| 846 | 2962680100 | CONDENSER SNAPPER |
| 847 | 2978720100 | PLASTIC CHASIS ASSY |
| 856 | 2974940100 | HINGE PIN HOLDER (PLASTIC) |
| 857 | 2963150300 | SPRING |
| 861 | 2963330400 | FRONT SELING FELT |
| 865 | 2962650100 | LAMP COVER |
| 873 | 2963230100 | PCB HOLDER COVER |
| 877 | 2962930200 | PROCESS FAN |
| 888 | 2951061000 | MICRO_SWITCH |
| 888 | 2951060600 | MICRO SWITCH |
| 888 | 2951060700 | MICRO_SWITCH |
| 891 | 2961680100 | COOLING FAN |
| 897 | 2951260100 | POMP WATER TANK HOSE. |
| 9 | 2963650100 | HANDLE |
| 906 | 2961190200 | SPECİAL WASHER (8,1*17*1,5) |
| 921 | 2980100300 | CONDENDER ASSY. (60CM) |
| 921 | 2980100200 | CONDENDER ASSY. (60CM) |
| 932 | 2961961000 | SIDE PANEL |
| 985 | 2954700100 End Of Life | Micro Switch Ass. |
| 985 | 2954700400 | Micro Switch Ass. |
Service Documents
Parts for This Model
Showing compatible parts for model DCU 8230