Beko DCSC821W Condenser Tumble Dryer Tripping Electrics at the End of the Cycle
Customer Question
Andrew Perkins asks:
Hello there. I have a Beko DCSC821W tumble dryer that trips the electrics towards the end of a cycle. Only on big loads, small loads are fine. I have changed the heater assembly with thermostats and that has not rectified the issue. Generally the suppressor would trip it at the start not the end and the NTC sensor tests ok as far as I can see. Any ideas ? Thank you so muchAndy.
Model: Dcsc821w
Paul Says:
I will try and help with this problem about Beko DCSC821W Tumble Dryer,
Hi Andrew,
Thank you for your question about your Beko condenser tumble dryer. This issue often happens because dampness builds up around the heating element, causing the machine to trip at the end of the cycle. To fix this, you need to clean all the ducting units and the condenser. Moisture getting into the heating system is a common problem with these machines.
I've got you a full workshop manual and some useful videos on how to maintain your machine. It's important to vacuum out all the dust inside the machine, as dust restricts airflow and makes the condensing process less effective. This can cause the dryer to use more electricity than needed.
Make sure to thoroughly clean the condensing box, as air flows in two directions through it. The workshop manual will show you how to dismantle the machine, and I've included exploded diagrams that show every component. The reference numbers next to the parts match a list of spare parts at the bottom of the page.
You might not need to buy any new parts if everything is cleaned well. It's also a good idea to run an empty cycle for 30 to 40 minutes to dry out the whole system. If you do need spare parts, links are provided at the bottom of the page. If the heating element is damaged, it may need replacing.
I hope this information helps you. I've also added a wiring diagram so you can understand the electrical system. Thank you for contacting us, and feel free to reach out if you need further assistance.
All the best,
Paul
If you want to support the site please mark us to your favourites, also I would be grateful if you would subscribe to our social media channels as this really helps my site and keeps us going.
YouTube. http://www.youtube.com/user/howtorepair
Facebook. https://www.facebook.com/how.to.repair.appliances
And if we really helped you save money you can always click on the Buy Paul a Beer page

Beko DCSC821W Tumble Dryer Spares
Match your part for Beko DCSC821W Tumble Dryer and the use reference number in list below and click on the link to your part
Beko DCSC821W Condenser Tumble Dryer Wiring Diagram
Beko DCSC821W Condenser Tumble Dryer Service Manual
Beko DCSC821W Condenser Tumble Dryer Service Manual 2
Beko DCSC821W Condenser Tumble Dryer Service Program
Beko DCSC821W Condenser Tumble Dryer Error Flows
Beko DCSC821W Condenser Tumble Dryer Main Body
Beko DCSC821W Condenser Tumble Dryer Door and Top Panel
full list of spare parts for Beko DCSC821W Tumble Dryer model below
| Reference | Part Number | Description |
|---|---|---|
| 1 | 2974500100 | TOP PLATE |
| 10 | 2976900100 | FRONT DOOR ASSEMBLY |
| 1003 | 2971650300 | CAPACITOR (ARCOTRONICS 9 uF) |
| 1005 | 2962510800 | CONDENS PUMP |
| 1005 | 2962510600 | CONDENS PUMP |
| 1044 | 133000001 | WASHER 12x18x1 DIN 988.. |
| 1045 | 160200200 | Snap Ring 9x1 DIN 6799 DRCS68 |
| 1046 | 2973900500 | REAR PANEL ASSY |
| 1077 | 492204404 | PULLEY ASSY FOR SERVICE-ARES |
| 1087 | 2982820100 | HOSE AND CABLE HOLDER OPPOSITE DIRECTION |
| 1098 | 2962630100 | FAN COVER - COOLING |
| 12 | 2962120100 | INNER DOOR_(ARES_ARC1_WITHOUT_SWITCH) |
| 1209 | 2969500300 | LOCK BODY ASS |
| 1211 | 2963910100 | LIGHT GUIDE |
| 1244 | 2979290100 | POMP COVER |
| 1246 | 2971703502 | CABLE ASSEMBLY |
| 1248 | 2960910300 | SILICONE GASKET |
| 1249 | 2980703800 | CABLE ASSEMBLY |
| 1256 | 2973100100 | SHAFT-FRONT BEARING ASSY |
| 1259 | 2972300100 | FILTRE CASETTE ASSY |
| 1260 | 2962960100 | OVERFLOW FLOAT |
| 1268 | 2963670100 | LIGHT GUIDE SET |
| 1271 | 2962690100 | AIR GUIDING PART |
| 1279 | 2968300300 | BEARING SENSOR COVER ASSEMBLY |
| 1287 | 2960150100 | 2960150100 |
| 1290 | 2962590100 | DOOR GASKET |
| 1295 | 2963120400 | 2963120400 |
| 1303 | 2962450100 | TANK GUIDE (TOP_60CM) |
| 1306 | 2961390200 | TANK GUIDE BARRIER |
| 1313 | 2705810300 | 2705810300 |
| 1377 | 2965200300 | MAIN CABLE ASSEMBLY |
| 1390 | 9002900200 | COUNTERSUNK HEAD SCREW (PT-4X14) |
| 1398 | 2951780300 | 2951780300 |
| 1399 | 2962950100 | 2962950100 |
| 14 | 2962170200 | HINGE |
| 1401 | 2963210100 | 2963210100 |
| 1417 | 2705810400 | 2705810400 |
| 1440 | 2961690100 | 2961690100 |
| 1451 | 2963180200 | BACK COVER FELT |
| 1453 | 2953741500 | SINGLE ADHESINE EPDM FOAM |
| 1454 | 2963090100 | AIR GUIDING GASKET |
| 1455 | 2962810100 | SIDE WALL PIN |
| 1457 | 2971900200 | NTC (EPCOS_12K) |
| 1457 | 2971900500 | NTC |
| 1457 | 2971900300 | NTC (THINKING_12K) |
| 1457 | 2971900100 | NTC |
| 1459 | 2969900200 End Of Life | ROLLER ASSY |
| 1460 | 2951261000 | POMP WATER TANK HOSE. |
| 1462 | 2951260800 | POMP WATER TANK HOSE. |
| 1463 | 2951260900 | 2951260900 |
| 1465 | 2951261100 | POMP WATER TANK HOSE. |
| 1466 | 9003272000 | PLASTIC SCREW (DIAMETER 4x10) INOX |
| 1469 | 100700120 | SCREW (B4.2*9.5 DIN 7982-H) |
| 1471 | 2953741100 | 2953741100 |
| 1473 | 2962390100 | LOCK MOUTH |
| 1474 | 2960720100 | TIME DELAY PCB |
| 1475 | 2960304600 | CABLE ASSEMBLY |
| 1478 | 2963420100 | 2963420100 |
| 1481 | 2961720100 | COOLING AIR INFLOW RECTIFIER |
| 1482 | 2963240100 | COOLING AIR INFLOW FELT |
| 1483 | 2963250100 | COOLING AIR OUTFLOW FELT |
| 1484 | 2961990100 | SIDE SUPPORT (RIGHT 60CM) |
| 1485 | 2962010100 | Side support left 60CM |
| 1486 | 2974470300 | 2974470300 |
| 1486 | 2974470700 | 2974470700 |
| 1486 | 2974470100 | 2974470100 |
| 1489 | 2962290100 | DOWN HINGE GUIDE |
| 1490 | 2962310100 | UP HINGE GUIDE |
| 1492 | 2962460100 | TANK GUIDE CAP |
| 1493 | 2826510200 | PEG PLASTIC CLAMP |
| 1495 | 9003271700 | 9003271700 |
| 1587 | 2966990100 | CABLE TRAY |
| 166 | 2994901100 | MAIN CABLE ASSEMBLY |
| 169 | 2970445400 | POWER SUPPLY CORD |
| 169 | 2970447100 | POWER SUPPLY CORD |
| 169 | 2970444900 | POWER SUPPLY CORD |
| 18 | 2973500100 | ADJUSTABLE PLASTIC FOOT ASSY. |
| 180 | 2964170100 | ON_OFF SWITCH(ROLD (+) FORM) |
| 186 | 2970012302 | ELECTRONIC PCB ASSY. (CNDU SENS_3K) |
| 189 | 491500303 | POLY-V 285 H 4 MA BELT |
| 197 | 2963749003 | DRAWER PANEL ASS. |
| 200 | 2976109030 | PANEL ASSEMBLY |
| 2013 | 2970540100 | 2970540100 |
| 203 | 2976702000 | PROGRAMME KNOB BUTTOM_ASSY |
| 2071 | 2972960100 | DUAL SOCKET COVER |
| 2072 | 2972950100 | DUAL SOCKET CASING COVER |
| 208 | 2963989029 | PANEL BODY |
| 300 | 2963680100 | FUUNCTION BUTTON |
| 33 | 9001230800 | PLASTIC CLAMP 152 mm |
| 339 | 2963640100 | OUTER DOOR |
| 341 | 2962150100 | LOCK HOOK |
| 374 | 265900012 End Of Life | OVEN LAMP 15 W-230 V |
| 401 | 2963580100 | FRONT PANEL |
| 4210 | 2974870100 | INTERFERENCE FILTER |
| 43 | 2960310329 | USER'S MANUAL. |
| 468 | 2963710100 | ON OFF BUTTON (TIP02+ARC 734 MAVI) |
| 48 | 2971400400 | DRUM ASSEMBLY |
| 481 | 2827190400 | Rotary switch |
| 581 | 2966980100 | HEATER CABLE GUARD |
| 583 | 2705870100 | 2705870100 |
| 584 | 2962860100 | DRUM LIFTER |
| 59 | 2962470200 | ELASTIC POLY-V BELT. 7PH 1956 |
| 63 | 2963141600 | DRYER MOTOR |
| 632 | 2962160100 | 2962160100 |
| 65 | 2970101500 | HEATER ASSY |
| 685 | 2963690100 | TIME ADJUSTMENT BUTTON |
| 750 | 2961850100 | PCB HOLDER |
| 804 | 2973800700 | 2973800700 |
| 804 | 2973800100 | 2973800100 |
| 804 | 2973801100 | REAR DRUM TIGHTNESS PLATE ASSY |
| 822 | 2963540100 | KICK PLATE - LEFT |
| 826 | 2972900500 | HEATER COVER ASSY |
| 826 | 2972900800 | HEATER COVER ASSY |
| 827 | 2962020100 | UPPER BEAM |
| 8303 | 9003270200 | 9003270200 |
| 8318 | 2002370900 | HOSE CLAMP (Ø 16.4) |
| 8320 | 100601520 | 100601520 |
| 834 | 2959400200 | REAR BEARING ASSEMBLY |
| 8384 | 9003270100 | 9003270100 |
| 8385 | 9003270400 | PLASTIC SCREW (4_10) |
| 8386 | 9003270500 | 9003270500 |
| 8392 | 9003610300 | 9003610300 |
| 8397 | 9003610100 | 9003610100 |
| 8398 | 9003670100 | 9003670100 |
| 8403 | 9003860300 | 9003860300 |
| 8413 | 120800120 | 120800120 |
| 8419 | 2963340100 End Of Life | WASHERED NUT (M6x1) |
| 842 | 2960190100 | CABLE HOLDER |
| 8422 | 2951580400 | COUNTERSUNK HEAD PT SCREW (4.5x12) |
| 8428 | 2971870100 | 2971870100 |
| 843 | 2962440100 | WATER TANK (UP_8KG) |
| 8430 | 9003860900 | 9003860900 |
| 8434 | 2951780400 | 2951780400 |
| 844 | 2961290200 | 2961290200 |
| 845 | 2963530100 | KICK PLATE - RIGHT |
| 846 | 2962680100 | CONDENSER SNAPPER |
| 847 | 2978720100 | PLASTIC CHASIS ASSY |
| 856 | 2974940100 | HINGE PIN HOLDER (PLASTIC) |
| 857 | 2963150300 | SPRING |
| 861 | 2963330400 | FRONT SELING FELT |
| 865 | 2962650100 | LAMP COVER |
| 873 | 2963230100 | PCB HOLDER COVER |
| 877 | 2962930200 | PROCESS FAN |
| 888 | 2951060600 | MICRO SWITCH |
| 888 | 2951061000 | MICRO_SWITCH |
| 888 | 2951060700 | MICRO_SWITCH |
| 891 | 2961680100 | COOLING FAN |
| 897 | 2951260100 | POMP WATER TANK HOSE. |
| 9 | 2963650100 | HANDLE |
| 906 | 2961190200 | 2961190200 |
| 921 | 2980100200 | CONDENDER ASSY. (60CM) |
| 921 | 2980100300 | CONDENDER ASSY. (60CM) |
| 932 | 2961961000 | SIDE PANEL |
| 985 | 2954700100 End Of Life | Micro Switch Ass. |
| 985 | 2954700400 | Micro Switch Ass. |
Service Documents
Parts for This Model
Showing compatible parts for model Dcsc821w