BEKO OIF22100X Electric Built-in Single Fan Oven not working
Hi Paul I have a Beko OIF22100X Electric Built-in Single Fan Oven which is not working. The Fan is working in the oven but its not getting hot,I am assuming this will either need a new fan or a new element, please advise.As its a built in oven will this be a difficult job to carry out a repair? thanks in advance
I will try and help with this problem with your Beko OIF22100X Electric Built-in Single Fan Oven
This sounds like the fan oven element may be at fault
I have included videos below for you to assist you to replace the old one
They will show you how to remove Beko elements and fit the new one.
The other video is on how to test Beko fan oven elements
In the video, I mentioned about 5 common problems.;
- Oven will not heat because the element is faulty.
- Oven won't heat because timer on manual.
- Oven won't heat because of a fault with thermostat or selector switch.
- Oven not cooking evenly (one element faulty or fan not working correctly).
- Oven not reaching temperature normally an element but possible fan motor.
Common Problems with Electrical Ovens
- The oven will not turn on
The first thing you need to check is that the oven timer is not on auto if it is, turn it on to manual.
- No Heat in Oven
If the fan is running and the thermostat light comes on but you get no heat (or just the thermostat light on in non-fan ovens and cookers) then the probability is that the fan element or oven elements have failed.
- Electricity trips (Rcd) when I turn the oven on or grill
This is normally an element that has gone to earth, This is a well-known fault with electric ovens, the insulation breaks down in the elements and trips the RCD , best way is to stick a meter on each element and check that they have not got earth leaks on them. But this can also be a wiring fault.
- The grill element doesn't work
This would usually indicate that the grill element is faulty. Check these: Grill element, Oven changeover switch, Overheat thermostat, Main oven thermostat, if used to regulate the grill temperature.
- The oven fan is not working or spinning correctly (slow) or is noisy
The fan motor may need to be replaced see video on this also the cooling fan motor can cause same problems.
- The oven overheats and burns everything
Normally this is a simple thermostat failure which would manifest itself as this symptom.
- The oven or cooker cuts out after it's been on for a while
This is an overheating problem which can be caused by the fan motor or main oven thermostat or a faulty safety thermostat that will be causing the problem. It can also be caused by a failure of the cooling fan, where fitted, but usually these go noisy before failing, Safety thermostats are used to prevent the oven or cooker overheating and will shut the oven down.
If you want to support the site please mark us to your favourites, also I would be grateful if you would subscribe to our social media channels as this really helps my site and keeps us going.
YouTube. http://www.youtube.com/user/howtorepair
Facebook. https://www.facebook.com/how.to.repair.appliances
And if we really helped you save money you can always click on the Buy Paul a Beer page
Beko Oven OIF22100X Spare Parts
Beko OIF22100X Oven Wiring Diagram
Beko OIF22100X Oven Service Manua
Beko OIF22100X Oven Structure Group
Beko OIF22100X Oven Back Support
Beko OIF22100X Oven Body
Beko OIF22100X Oven Control Panel
Beko OIF22100X Oven Ventilation
Beko OIF22100X Oven Other Parts
Beko OIF22100X Oven Door Group
Beko OIF22100X Oven Door Group 2
Beko OIF22100X Oven Heating Element Not Working
Beko OIF22100X Oven Commutator Not Working
Beko OIF22100X Oven Lamp Not Working
Beko OIF22100X Oven Power Issue
Beko OIF22100X Oven Electrical Current Issue
Beko OIF22100X Oven Temperature Issue
Beko OIF22100X Oven Turbo Motor Not Working
full list of spare parts for this model below Beko OIF22100X Electric fan oven
Service Documents
Parts for This Model
Showing compatible parts for model Beko OIF22100X
