Collection: Cooker Hood

This genuine metal mesh grease filter is a direct replacement for a clogged or damaged filter in compatible Balay, Blaupunkt, Bosch, Constructa, Junker, Neff, Pitsos, Profilo and Siemens cooker hoods. The metal mesh filter traps airborne grease particles before they reach the motor and fan, protecting the appliance and maintaining extraction efficiency. Cooker hood filters naturally become clogged after use, reducing extraction performance and potentially causing odours. Replacing it with this genuine filter restores full extraction efficiency. Specifications: 2 middle clips with push-down mechanism. Dimensions: 360 x 265 x 10mm. Manufacturers Part Number 00703451. Alternative Part Numbers 703451, 8713411159558. EAN 4242001259872. ASWO Reference: 6025714.

The purpose of the motor in your cooker hood is to draw cooking air and odours in and expel them outdoors or back into the kitchen. If the fan in your cooker hood no longer turns then it may be time to take advantage of this quality replacement motor. Please check the model fit list to ensure that this part is correct for your model. Manufacturers Part Number 795210404

This is a genuine replacement impeller for Flavel cooker hoods. The impeller (D8 PP-V2 + NUT) is the rotating fan blade component that draws air through the cooker hood and expels it via the ducting or recirculation filter. It is a direct replacement for the original part. A damaged or worn impeller will reduce the extraction performance of the cooker hood, causing poor smoke and odour removal. Replacing the impeller restores full extraction power. This part carries manufacturer part number 1330435713 (also referenced as 133.0435.713). Please check the model fit list before ordering to confirm compatibility with your specific Flavel cooker hood model.

This is a genuine replacement control light kit for Flavel cooker hoods. The control light kit (KIT COM.GROUP F-LIGHT) contains the LED light group components for the control panel of the cooker hood, allowing the indicator lights to function correctly. Failed or damaged control lights can make it impossible to see which settings are active on the cooker hood. Replacing the control light kit restores full visibility of the cooker hood control panel. This part carries manufacturer part number 1330387607 (also referenced as 133.0387.607). Please check the model fit list before ordering to confirm compatibility with your specific Flavel cooker hood model.

This is a genuine replacement LED power supply transformer for Flavel cooker hoods. The transformer converts the mains voltage to the correct low voltage (12VDC 5W) required to power the LED lighting in the cooker hood. It is a direct replacement for the original part. A failed transformer will cause the LED lighting in the cooker hood to stop working entirely. Replacing the transformer restores the LED lighting function without the need to replace the entire lighting assembly. This part carries manufacturer part number 1330374938 (also referenced as 133.0374.938). Alternative part number: 1330289828. Please check the model fit list before ordering to confirm compatibility with your specific Flavel cooker hood model.

This is a genuine replacement LED transformer for Flavel cooker hoods. The LED transformer is the power supply unit that converts the mains voltage to the correct low voltage (DC 8W 12V) required to power the LED spotlight in the cooker hood. It is a direct replacement for the original part and is designed to work with the existing LED spotlight assembly. A failed transformer will cause the LED lighting in the cooker hood to stop working entirely. Replacing the transformer restores the LED lighting function without the need to replace the entire lighting assembly. This part carries manufacturer part number 1330299377 (also referenced as 133.0299.377). It is a DC 8W 12V R110-240 LED power supply. Please check the model fit list before ordering to confirm compatibility with your specific Flavel cooker hood model.

This is a genuine replacement hinge kit for Flavel cooker hoods. The hinge kit contains the left and right hinges (DX-SX) that allow the cooker hood door or panel to open and close correctly. The hinges are made to the original manufacturer specification and are a direct replacement for the original parts. Worn or broken hinges can cause the cooker hood door or panel to sag, stick, or fail to close properly. Replacing the hinge kit restores correct door operation and ensures the cooker hood functions as intended. This part carries manufacturer part number 1330281202 (also referenced as 133.0281.202). It is a Southco DX-SX hinge kit. Please check the model fit list before ordering to confirm compatibility with your specific Flavel cooker hood model.

This is a genuine replacement cassette filter for Flavel cooker hoods. The cassette filter sits inside the cooker hood and captures grease and airborne particles produced during cooking. Regular replacement of the filter maintains the efficiency of the cooker hood and reduces the risk of grease build-up, which can be a fire hazard. A blocked or saturated filter reduces the airflow through the cooker hood, causing it to work less effectively and potentially leading to odours and smoke remaining in the kitchen. Replacing the filter restores full extraction performance. This part carries manufacturer part number 1330200454 (also referenced as 133.0200.454). It is a 124x254mm cocktail cassette filter. Please check the model fit list before ordering to confirm compatibility with your specific Flavel cooker hood model.

This is a genuine replacement halogen lamp for Flavel cooker hoods. The GU10 35W halogen lamp provides the internal lighting for the cooker hood, illuminating the cooking area below. It is a direct replacement for the original lamp and fits directly into the GU10 lamp holder. A blown or failed lamp will leave the cooker hood without working lighting, making it difficult to see the cooking area clearly. Replacing the lamp restores full lighting function to the hood. This part carries manufacturer part number 1330198227 (also referenced as 133.0198.227). It is a GU10 35W 230V halogen lamp. Please check the model fit list before ordering to confirm compatibility with your specific Flavel cooker hood model.

This AEG, Electrolux, and Zanussi Carbon Filter (C00383426) is a high-performance activated charcoal filter designed for recirculating cooker hoods. It is the component responsible for removing odors, smoke, and steam from the air before it is vented back into your kitchen. There are various videos on our youtube channel about how to fix any appliance problems! Manufacturer’s Part Number: 484000008609, C00383426 Alternative Part Numbers: 481948048137, 482000077557, C00090700

Restore the efficiency of your kitchen extraction system with this high-quality replacement cooker hood filter. Over time, existing filters can become saturated, drastically reducing their ability to combat airborne grease and cooking odours. This degradation in performance often leads to lingering smells and a greasy film on kitchen surfaces. By replacing your exhausted filter with this active charcoal unit, you will notice an immediate improvement in air quality. This filter is designed to effectively trap grease and neutralise odours, ensuring a fresher kitchen environment. Cooker Hood Maintenance Advice To maintain optimal performance, it is recommended that you change your filters as soon as they reach saturation. Beyond this point, they provide no benefit to your appliance. Summer Use: Where possible, duct fumes to the outside air during warmer months. Winter Use: Utilise the cooker hood in recirculating mode during colder months to retain heat within the home. Please verify the model fit list to ensure this part is compatible with your specific appliance before purchasing. Key Features / Highlights: Type: Active Charcoal / Anti-Odour Filter Dimensions: 427mm (W) x 171mm (L) x 27mm (H) Pack Quantity: Single Pack Manufacturer Part Number: 00296178 Alternative Part Numbers: 296178, 05054127042578, 174.43.0095 EAN: 4242006006334

The Beko Blomberg Cooker Hood Extractor Light Lamp Holder Socket (Part Number C00911695) is a genuine spare part designed for various extractor hoods manufactured by the Arcelik Group (which owns Beko and Blomberg). This specific component is the electrical socket assembly where the light bulb (often a halogen or LED type) screws or pushes into. It is crucial for providing power and structural support to the hood's lighting system. There are various videos on our youtube channel about how to fix any appliance problems! Manufacturer’s Part Number: C00911695

Restore the ability to control the speed and light of your extractor fan with this genuine Gorenje Korting Mora Cooker Hood Extractor Sliding Motor Switch. This component is the main slide-type switch panel (often referred to as a keyboard switch) located on the fascia of the cooker hood. It contains the internal electrical contacts and the visible external sliding levers used to: Select Fan Speed: Control the motor's power (e.g., Low, Medium, High). Operate the Light: Turn the integrated extractor hood light ON/OFF. If the motor speeds are no longer selectable, the light fails to switch on/off correctly, or the physical slide mechanism is stiff, broken, or has fallen apart, replacing the entire switch assembly is usually required. There are various videos on our youtube channel about how to fix any appliance problems! Manufacturer’s Part Number: 507485

Restore the aesthetic finish and protect the bulbs in your extractor hood with this genuine Bosch Neff Siemens Cooker Hood Extractor Light Lamp Cover. This component is the plastic or glass lens that snaps into the underside of the cooker hood, covering the light source (bulb or LED). This cover is essential for: -Safety: Shields electrical components from grease and moisture. -Protection: Prevents grease and steam from damaging the bulbs or wiring. -Light Diffusion: Ensures the cooking area is evenly and effectively illuminated. If your original lens is cracked, discolored, or missing, replacing it ensures your workspace is properly lit and your hood maintains its clean appearance. There are various videos on our youtube channel about how to fix any appliance problems! Manufacturer’s Part Number: 00264984

Restore the aesthetic finish and protect the bulbs in your extractor hood with this genuine Bosch Siemens Cooker Hood Extractor Light Lamp Cover. This transparent or opaque plastic lens snaps into the underside of the cooker hood, covering the light source (bulb or LED module). This cover is essential for: -Diffusing Light: Softens the light to illuminate the cooking area effectively. -Protection: Shields the delicate bulbs from grease, steam, and accidental damage. -Safety: Ensures electrical components remain covered. If your original lens is cracked, discolored, or missing, replacing it ensures your workspace is properly lit and your hood maintains its clean appearance. There are various videos on our youtube channel about how to fix any appliance problems! Manufacturer’s Part Number: 00350003

Restore the full control over the fan speed and lighting of your kitchen extractor with this genuine Bosch Neff Siemens Cooker Hood Extractor PCB Control Module. This Printed Circuit Board (PCB), often called the Relaisboard or Switch Module, is the electronic hub that manages the hood's vital functions. The module receives input from the front control panel buttons (switches) and then sends power to the correct components, such as the extractor fan motor and the hood lighting. If your extractor hood is suffering from: -Non-responsive or erratic buttons. -Fan speed that cannot be adjusted. -Lights that fail to turn on or off. -Complete power failure of the hood. This control module is the necessary replacement to restore functionality. There are various videos on our youtube channel about how to fix any appliance problems! Manufacturer’s Part Number: 00499898